How to Paint Your Home’s Exteriors

Removing old paint and cleaning the walls is crucial to achieving a smooth polished fresh paint coat. You must remove all signs of dirt, mildew and grease from the walls and roof with a hand scraper or a power washer.

Be careful while using a power washer as too much pressure can cause cracks in the mortar at the joints and water can seep through, damaging the structure in the long run.

Allow the walls and roof to dry completely before applying heat reflective roof paints on the roof or other paint on the walls. The paint colors will never hold well on damp surfaces and will peel off in a few years.

Remove all loose paint with a metal scrapper, chemical stripper or wire brush. Next, use the most suitable grade of sandpaper to scrape the surface thoroughly in order to get a clean, smooth surface that is ready for painting.

Priming the Surface

Roofing or walls that have been stripped of old paint needs to be primed properly before a fresh coat of heat reflective roof paints or wall paint can be applied. The primer should be compatible with the paint you are using and the surface on which it is to be applied. Hire house painter to give your house a new look!

This is also the best time to re-caulk all openings or crevices on the surface, frames, edges and sills. Neatly apply putty on all gaps, cracks, holes or damages. The fresh coat of paint will hide all such damages and your house will look as good as new.

Related Post: Building Maintenance